Tag Archives: parts

Two Tip Tuesday!

3 Feb

There’s no wrong way

Originally uploaded by CleverIndie

I’m going to start collecting tips and sharing them…Two on Tuesday, ok? Cool. Make sure you get the two tips next Tuesday by subscribing via email!

Clickity click here!

I love reusing spools from my chain purchases to hold small things… They are usually wide enough that they are more tip resistant than other containers, which is an important feature for me, what with being less than grace personified and all…

I do quite a bit of work either on a high countertop/bartop where I can stand or sit (mostly stand), or sitting on a softer surface with plenty of back support… Things tend to get flung and knocked over (again, another reason why I hesitate to work with glass and gemstones and if I do I always double the recipe) in either location, this contraption prevents that a bit…

Basically, I packing tape one hole, with a little bit of paper so it’s non stick on the inside of the well… I have, in the past, used double stick tape to tape this to my tray table/lap desk/workbench, but in each location I wound up getting too cocky, started talking with my hands (I’m a passionate hand talker…), and kablammmm! small bits (headpins, ear wires, you name it) everywhere….

And, when working from one of my satellite locations, I like to wind my tape measure around the outer portion… So it’s handy…

Another tip? When Target has silicone baking mats in the dollar section near the entrance I grab a few- they are easily cleaned during messy kid crafts (yet they give kids a colorful background and contrast- very helpful for some kiddos) and they are great when working with things that tend to roll away, a little non-slip grip and cushioning…

OK, that’s all I’ve got for now…

Hugs all around,
xo
bek

Advertisements

Mama’s Brand New Drawers!

29 Mar

*swoon*

Originally uploaded by CleverGirlBek

Ok. I finally did it. I finally had enough of my little small parts boxes stacked high in their bright orange Black & Decker caddies…
So I took some measurements and did some research…

It’s a pretty obvious solution to my small-parts storage needs (in this case my bead collection) but it took awhile to get here….

My wants (wishes) were:
-able to keep dust out
-mobile within our home (casters, or overall portability)
-easily transportable outside the home (in case of emergency, but not a “you have 5 minutes to get out of the house and have to spend a week in a shelter” sort of emergency…. I do have my priorities straight.)

I researched a few options, and eventually decided to invest in a steel literature sorter- like the ones used in schools as mailboxes for the teachers… Sheesh, again with the old office stuff floating my boat…..

I already had all of these (ok. 30 of them, 24 are being used, 6 are just waiting for occupants) small parts boxes with lids… I figured I could put them in my (rather large considering I’m not a clothes junkie) closet and give each box a bin….Nicer and easier and less noisy (and frankly, hard on my old bones and muscles these days which really don’t take kindly to much lately) than pulling them in and out of the plastic caddies they came with.

Well, earlier this week I took another look at topdeq.com’s offerings (I have been getting their catalog since way back when) and my brain just decided to do the math…. I realized I could fit 2 tackle container things in each drawer- totally releasing the concept of buying the Bisley brand drawer dividers (at $10-$18 a pop and still not enough spaces per drawer for my liking)….

So I ordered…

I wound up with this beauty…. This is a Bisley unit, purchased from Topdeq.com, and delivered yesterday by freight. It has 15 drawers…Each drawer measures 2″ x 12″ x 16″…. Each drawer fits two of my little small part tackle boxes with a little wiggle room- just enough to put that hank or two, or bag of beads, where I can have a visual reminder of it (hugely important with my ADD and creating- I tend to have stuff everywhere because with me out of sight out of mind holds so true) when I open up the drawer of similar beads….

Anyway, this came with a plinth (steel riser) and I bought the caster attachment to go with the unit… So off came the plinth and on went the casters….

I busted the hinged lids off the little divided containers -with some success…. On some I had to cut a hinge, but the lids still fit on top, and if and when we do move and I need to transport everything I can just use some of those fabulous “h” rubber bands to hold everything secure….

So now I have a unit that holds all of my beads (I don’t like to buy more than a strand or two at a time as I get bored easily, so most beads fit in here)… And is organized…

And mobile….
And easily stashable (fits in the hall closet/linen closet…. Also tucks under my elevated kitchen bar area (43″ tall….Bisley unit is around 36″ I believe)….
Dust free…
Quiet….
and of course easy enough to use for a quick bead sort that I won’t put it off until I have a gallon bucket of loose beads (like now. *gulp*)….

It was delivered super fast- I ordered Monday night and got the call about delivery on Wednesday… Pretty awesome. And for the amount of space and comfort and peace of mind this creates, it was totally worth it, and no more expensive than the various other solutions I was looking at. Actually, as the drawers are such a great size, and not too deep, I wound up saving money and space…Yay!

I just need to pen some pretty labels for the drawers….

Oh and here is a picture of one of the drawers (with a freshly started small parts, tackle bin/thing, hence it has space to add more yippee!)….

drawers

My only cons about this purchase:  I was instantly aware upon unpacking that I have many more spaces in my studio and home for rolling steel units and I have a pretty clear idea of what drawer sizes I need and hey, add a sturdy top to these badboys and I have a nice packing table…. Woohoo!

Also- the drawers don’t have stops. *gasp* So I will have to rig some up… Boyo has been warned that the drawers are not to play with, and I told him a dramatic bedtime story about what would happen if a drawer was pulled too far…. It involved beads, the shortcomings of our vacuum, and the dynamics of hard round things on tile flooring and tender little foot-soles….

I’ll list some of the other options I looked at shortly…. Some cool things for storing for folks like me that are combining family and work and art and then taming them into a happy and less frustrated ball of goodness.

%d bloggers like this: